Person
UniversitätsprofessorMarek Behr
Ph.D.Professor
Chair for Computational Analysis of Technical Systems
Address
Building: Rogowski
Room: 227
Schinkelstraße 2
52062 Aachen
About me
- Univ.-Prof. (C4) at the Chair for Computational Analysis of Technical Systems in the Faculty of Mechanical Engineering of the RWTH Aachen University since 2004
- Founding director of the Center for Simulation and Data Science since 2018
- Executive council member of the International Association for Computational Mechanics since 2020
- President of the German Association for Computational Mechanics since 2021
- Speaker of International Research Training Group 2379 Modern Inverse Problems since 2018
- Adjunct Professor of Chemical and Biomolecular Engineering at Rice University since 2005
- Complete CV and 2-page CV (as of March 2021)
Research
My Google Scholar h-Index is 40. My ISI h-Index is 28, based on circa 3,400 citations, according to my ResearcherID page.
My Erdős number is 4, thanks to joint publications with Leo Franca.
Teaching
I teach the following regular courses. In the summer semester:
Simulation Methods in Mechanical Engineering
Parallel Computing in Computational Mechanics
and in the winter semester:
Journal Article
Contribution to a Book
Title |
---|
Finite Element Modelling of In-Stent Restenosis Published in: Current Trends and Open Problems in Computational Mechanics / edited by Fadi Aldakheel, Blaž Hudobivnik, Meisam Soleimani, Henning Wessels, Christian Weißenfels, Michele Marino (2022) |
Mold-Based Production Systems Published in: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors (2017) |
Individualised Production Published in: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher (2012) |
Modularisation for die-based production technologies Published in: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher (2012) |
Modularisierung für werkzeuggebundene Produktionstechnologien Published in: Integrative Produktionstechnik für Hochlohnländer / Hrsg.: Christian Brecher, Werkzeugmaschinenlabor (WZL) der RWTH Aachen, Lehrstuhl für Werkzeugmaschinen (2011) |
Integrative Konfigurationslogik für Produkt-Produktionssysteme Published in: Integrative Produktionstechnik für Hochlohnländer / Hrsg.: Christian Brecher, Werkzeugmaschinenlabor (WZL) der RWTH Aachen, Lehrstuhl für Werkzeugmaschinen (2011) |
Contribution to a conference proceedings
Title |
---|
Performance Impact of the Newton Iterations per Solver Call in Partitioned Fluid-Structure Interaction Published in: 9th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (2021) |
Finite Element Flow Simulation in the human left ventricle with implanted ventricular assist device Published in: YIC 2021, VI ECCOMAS Young Investigators Conference : Book of abstracts. - July 7-9, 2021 (2021) |
Spline-Based Techniques for Partitioned Fluid-Structure Interaction Published in: YIC 2021, VI ECCOMAS Young Investigators Conference : Book of abstracts. - July 7-9, 2021 (2021) |
Advantages of Space-Time Finite Elements for Domains with Time Varying Topology Published in: The International Conference on High Performance Computing in Asia-Pacific Region Companion (2021) |
Blood Flow Dynamics in Stented Arteries Published in: 14th WCCM & ECCOMAS Congress 2020 : Virtual Congress 11-17 January, 2021 / Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (Eds.) (2021) |
Simulating dense granular flow using the μ(I)-rheology within a space-time framework Published in: 14th WCCM & ECCOMAS Congress 2020 : virtual congress, 11-15 January, 2021 / IACM, ECCOMAS ; Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (eds.) (2021) |
Performance Impact of the Newton Iterations per Solver Call in Partitioned Fluid-Structure Interaction Published in: Abstracts of the 9th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (2021) |
Finite Element Simulation of a Human Left Ventricle with Implanted Ventricular Assist Device Published in: 14th WCCM & ECCOMAS Congress 2020 : Virtual Congress 11-17 January, 2021 / Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (Eds.) (2021) |
Spline-Based Methods for Partitioned Fluid-Structure Interaction Published in: 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics : March 15-19, 2021 in Kassel, Germany : Book of Abstracts / GAMM, Gesellschaft für Angewandte Mathematik und Mechanik e.V., International Association of Applied Mathematics and Mechanics (2021) |
Computational Fluid-Structure-Contact Interaction in Temper Rolling of Aluminum Published in: 14th WCCM & ECCOMAS Congress 2020 : Virtual Congress 11-17 January, 2021 / Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (Eds.) (2021) |
Stabilized and DPG Methods for Viscoelastic Fluids Published in: 14th WCCM & ECCOMAS Congress 2020 : Virtual Congress 11-17 January, 2021 / Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (Eds.) (2021) |
Simplex-Space-Time FEM for Fluid-Structure-Interaction Published in: YIC 2021, VI ECCOMAS Young Investigators Conference : Book of abstracts. - July 7-9, 2021 (2021) |
PDEs on Domains with Time-Dependent Topology Published in: Book of abstracts : 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics (2021) |
Time-Continuous Simplex Space-Time Finite Element Method and Model Order Reduction for Deforming Domain Problems Published in: 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics : March 15-19, 2021 in Kassel, Germany : Book of Abstracts / GAMM, Gesellschaft für Angewandte Mathematik und Mechanik e.V., International Association of Applied Mathematics and Mechanics (2021) |
A Novel Approach to Fluid-Structure Interaction Simulations Involving Large Translation and Contact Published in: Isogeometric analysis and applications 2018 / Harald van Brummelen, Cornelis Vuik, Matthias Möller, Clemens Verhoosel, Bernd Simeon, Bert Jüttler editors (2020) |
Space-Time NURBS-Enhanced Finite Elements for Solving the Compressible Navier-Stokes Equations Published in: Numerical Methods for Flows : FEF 2017 Selected Contributions / Harald van Brummelen, Alessandro Corsini, Simona Perotto, Gianluigi Rozza, Editors (2020) |
A column collapse of a dense granular flow using the μ(I)-rheology within a space-time framework Published in: [5th ECCOMAS Young Investigators Conference, YIC 2019, 2019-09-01 - 2019-09-06] (2019) |
CFD Simulation of Oil Jets for Piston Cooling Applications Published in: 5th ECCOMAS Young Investigators Conference, YIC 2019 : September 1-6, 2019, Kraków, Poland (2019) |
Combining Interface Quasi-Newton Methods and the Robin-Neumann Scheme for Partitioned Fluid-Structure Interaction Published in: Book of Abstracts : 5th ECCOMAS Young Investigators Conference, YIC 2019 : September 1-6, 2019, Kraków, Poland / Edited by: Konrad Perzyński, Krzysztof Bzowski (2019) |
A Novel Multi-Vector Interface Quasi-Newton Method for Partitioned Fluid-Structure Interaction Published in: Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019) (2019) |
Solving compressible Navier-Stokes equations on simplex space-time meshes Published in: Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (2019) |
Simplex Space-Time Finite Element Methods for Advection-Diffusion Problems Published in: Book of abstracts of the 5th ECCOMAS Young Investigators Conference (2019) |
Application of space-time refinement for droplet formation during GMA welding Published in: Book of Abstracts : 5th ECCOMAS Young Investigators Conference : YIC 2019 : September 1-6, 2019, Kraków, Poland / Edited by: Konrad Perzyński, Krzysztof Bzowski (2019) |
Axisymmetric two-phase flow simulations on space-time meshes Published in: Proceedings in applied mathematics and mechanics : PAMM (2019) |
CFD Simulation of Oil Jets for Piston Cooling Applications Comparing the Level Set and the Volume of Fluid Method Published in: SAE international journal of advances and current practies in mobility (2019) |
Internal Compressible Flow Simulations on Simplex Space-Time Meshes Published in: 89thAnnual Meeting of the International Association of Applied Mathematics and MechanicsMarch 19-23, 2018Munich, Germany, Book of Abstracts (2018) |
Hemolysis Prediction in Medical Devices Using Cell Deformation and Pore Formation Models Published in: Biomedical engineering (2018) |
Multiple Reference Frames Formulation for Blood Damage Modeling in Medical Devices Published in: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics : March 19-23, 2018 : Munich, Germany : Book of abstracts (2018) |
Spline-Based Methods for Solving Thermal and Mechanical Fluid-Structure Interaction in Compressible Flows Published in: 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7) : 11-15 June 2018, Glasgow, UK (2018) |
Isogeometric Analysis in Fluid-Structure Interaction Problems Considering Structural Contact Published in: [ECCM - ECFD 2018 : 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems), ECCM 6 : 7th European Conference on Computational Fluid Dynamics, ECFD 7 : 11 - 15 June 2018, Glasgow, UK] (2018) |
How the deformation of red blood cells affects hemolysis estimation for ventricular assist devices Published in: [6th European Conference on Computational Mechanics/7th European Conference on Computational Fluid Dynamics, ECCM 6 / ECFD 7, 2018-06-11 - 2018-06-15, Glasgow, UK] (2018) |
Variational Multiscale or Eddy Viscosity: How to Deal with Blood Flows in Transitional Regimes? Published in: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics : Marc 19-23, 2018 : Munich, Germany : Book of abstracts (2018) |
Adaptive temporal refinement in injection molding Published in: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro (University of Palermo, Palermo, Italy) (2018) |
Comparison of optimization algorithms for the slow shot phase in HPDC Published in: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro (University of Palermo, Palermo, Italy). - B (2018) |
A Partitioned Approach for Fluid-Structure Interaction Using NURBS-Enhanced Finite Elements and Isogeometric Analysis Published in: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany / Editors: Malte von Scheven, Marc-André Keip, Nils Karajan (2017) |
Spline-Based Methods for Solving Fluid-Structure Interaction in Compressible Flows Published in: YIC 2017 : 4th ECCOMAS Young Investigators Conference and PhD Olympiad, 13 - 15 September 2017, Milano, Italy / Department of Civil and Environmental Engineering Politecnico di Milano (2017) |
Objective Functions for the Shape Optimization of Temperature Control Channels in High-Pressure Die Casting Published in: Proceedings in applied mathematics and mechanics (2017) |
A simplified simulation model for a HPDC die with conformal cooling channels Published in: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B (2017) |
Predicting shrinkage and warpage in injection molding: Towards automatized mold design Published in: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B (2017) |
Simulating Twin-Screw Extruders with Boundary Conforming Space-Time Finite Elements Published in: [19h International Conference on Finite Elements in Flow Problems, FEF 2017, 2017-04-05 - 2017-04-07, Rome, Italy] (2017) |
Boundary-Conforming Space-Time Finite Elements for Co-Rotating Intermeshing Domains Published in: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany / Editors: Malte von Scheven, Marc-André Keip, Nils Karajan (2017) |
Improving Numerical Stability of a Tensor-Based Blood Damage Model Using the Log-Conformation Formulation Published in: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany / Editors: Malte von Scheven, Marc-André Keip, Nils Karajan (2017) |
Stabilized Finite Element Methods for Computational Design of Blood-Handling Devices Published in: [International Workshop on Modelling and Simulation in Biomedical Applications, 2017-10-24 - 2017-10-25, Mariatrost, Austria] (2017) |
Strain-Based Blood Damage Modeling : Current Status and Future Perspectives Published in: The international journal of artificial organs (2017) |
Large Eddy Simulation with Stabilized FEM for Transition and Turbulence in Medical Devices Published in: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics March 6-10, 2017 Weimar, Germany : Book of abstracts / GAMM, Gesellschaft für Angewandte Mathematik und Mechanik e.V., International Association of Applied Mathematics and Mechanics; Deutsche Mathematiker-Vereinigung; [Veranstalter TU Ilmenau und Bauhaus-Universität Weimar] (2017) |
Simulation of Flow in Artificial Blood Pumps: Turbulence Modeling and Consideration of Blood Microstructure Published in: [2017 SIAM Conference on Computational Science and Engineering, SIAM CSE 2017, 2017-02-2 - 2017-03-03, Atlanta, Georgia, USA] (2017) |
On the Significance of Exposure Time in Computational Blood Damage Estimation Published in: High-performance scientific computing : first JARA-HPC Symposium, JHPCS 2016, Aachen, Germany, October 4-5, 2016 : revised selected papers / Edoardo Di Napoli, Marc-André Hermanns, Hristo Iliev, Andreas Lintermann, Alexander Peyser (eds.) (2017) |
Simulation of Oil Jets for Piston Cooling Applications Using Mesh Deformation and the Level Set Method Published in: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany / Editors: Malte von Scheven, Marc-André Keip, Nils Karajan (2017) |
Compressible Flows inside Piston Ring Pack Simulated with Space-Time Finite Elements Published in: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : Proceedings : 11 - 13 October 2017, Stuttgart, Germany / Editors: Malte von Scheven, Marc-André Keip, Nils Karajan (2017) |
Space-Time Finite Element Simulation of Internal Compressible Flows Published in: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics : March 6-10, 2017, Weimar, Germany : Book of Abstracts / GAMM, Gesellschaft für Angewandte Mathematik und Mechanik e.V., International Association of Applied Mathematics and Mechanics (2017) |
On The Significance of Exposure Time in Computational Blood Damage Estimation Published in: The international journal of artificial organs (2016) |
Free-Suface Flow Simulation with Space-Time Methods and Isogeometric Analysis Published in: USACM Thematic Conference on Isogeometric Analysis and Meshfree Methods : Abstracts : (Part 2, M-Z) (2016) |
Die swell as an objective in the design of polymer extrusion dies Published in: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ... - B (2016) |
Numerical Optimization of the Phase Interface in High-Pressure Die Casting Published in: 9th International Conferene on Multiphase Flow : May 22-27, Firenze, Italy : ICMV 2016 : Book of Abstracts (2016) |
Study on objective functions for the slow shot phase in high-pressure die casting Published in: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ... - A (2016) |
Schur Complement Based Preconditioning of the Stabilized Stokes Equations Published in: [5th European Trilinos User Group Meeting, 18.04.2016-20.04.2016, Garching, Germany] (2016) |
On the Improvement of a Physiological Blood Damage Model for Hemolysis Predictions in Medical Devices Published in: [VII European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, 05.06.2016-10.06.2016, Crete Island, Greece] (2016) |
An Interface-Tracking Approach to Viscoelastic Free-Surface Flows Published in: [The XVIIth International Congress on Rheology, ICR 2016, 09.08.2016-13.08.2016, Kyoto, Japan] (2016) |
On the Simulation of Viscoelastic Free-Surface Flows Published in: [12th World Congress on Computational Mechanics and 6th Asia-Pacific Congress on Computational Mechanics, WCCM 2016, 24.07.2016-29.07.2016, Seoul, South Korea] (2016) |
Simulating viscoelastic free-surface flows using an interface-tracking approach Published in: [VII European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, 05.06.2016-10.06.2016, Crete Island, Greece] (2016) |
Spline-based Finite Element Methods in Fluid-Structure-Interaction Published in: [12th World Congress on Computational Mechanics and 6th Asia-Pacific Congress on Computational Mechanics, WCCM XII and APCOM VI, 24.07.2016-29.07.2016, Seoul, South Korea] (2016) |
Spline-based Fluid-Structure-Interaction for Sloshing Tanks Published in: [VII European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, 05.06.2016-10.06.2016, Crete Island, Greece] (2016) |
Spline-Based Finite Element Methods for Fluid Flow on Deforming Domains Published in: [High-Order Finite Element and Isogeometric Methods 2016, HOFEIM2016, 30.05.2016-02.06.2016, Jerusalem, Israel] (2016) |
Spline-based methods for Interaction between Free-Surface Flows and Elastic Structures Published in: [VII European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS, 05.06.2016-10.06.2016, Crete Island, Greece] (2016) |
Numerical Study on Shock-Induced Fluid-Structure Interaction in Supersonic Flows Published in: [Joint DMV and GAMM Annual Meeting, GAMM DMV 2016, 07.03.2016-11.03.2016, Braunschweig, Germany] (2016) |
Numerical Aero-Structural Dynamic Simulations of the ASDMAD Wing Published in: New results in numerical and experimental fluid mechanics X : contributions to the 19th STAB/DGLR Symposium Munich, Germany, 2014 / Andreas Dillmann, Gerd Heller, Ewald Krämer, Claus Wagner, Christian Breitsamter, editors (2016) |
Influence of design parameters on the simulations of cooling oil jets for internal combustion engine applications using level set method Published in: [Annual Meeting of DMV and GAMM, GAMM DMV 2016, 07.03.2016-11.03.2016, Braunschweig, Germany] (2016) |
Spline-Enhanced Finite Element Methods for Coupled Fluid Flow Problems Published in: [GAMM DMV Jahrestagung, GAMM DMV 2016, 07.03.2016-11.03.2016, Braunschweig, Germany] (2016) |
Numerical Investigation of Rising Bubble Phenomena in Viscoelastic Fluids Published in: [Joint Annual Meeting of GAMM and DMV, GAMM DMV 2016, 07.03.2016-11.03.2016, Braunschweig, Germany : abstracts] (2016) |
Schur Complement Based Preconditioning of the Stabilized Stokes Equations Published in: [Joint DMV and GAMM Annual Meeting, GAMM DMV 2016, 07.03.2016-11.03.2016, Braunschweig, Germany] (2016) |
Advances in Strain-Based Hemolysis Estimation for Computational Design of Blood-Handling Devices Published in: [2nd International Conference on Biomedical Technology, ICBT15, 28.10.2015-30.10.2015, Hannover, Germany] (2015) |
Towards the Simulation of Deformable Sloshing Tanks with Spline-Based Methods Published in: [3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics, YIC GACM 2015, 20.07.2015-23.07.2015, Aachen, Germany] (2015) |
An Objective Function for the Slow Shot Phase in High-Pressure Die Casting Published in: [3rd ECCOMAS Young Investigators Conference (YIC), YIC GACM, 20.07.2015-23.07.2015, Aachen, Germany] (2015) |
Two-phase flows modeling of an impacting jet using the level-set method Published in: [3rd ECCOMAS Young Investigators Conference (YIC) 6th GACM Colloquium on Computational Mechanics 3rd Aachen Conference on Computational Engineering Science (AC.CES), YIC , 20.07.2015-23.07.2015, Aachen, Germany] (2015) |
Spline-Based Finite Element Methods in the Simulation of Deformable Sloshing Tanks Published in: [Engineering Mechanics Institute Conference 2015, EMI2015, 16.06.2015-19.06.2015, Stanford, USA] (2015) |
NURBS-based Approaches in Fluid Flow Simulations Published in: 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics : March 23-27, 2015 : Lecce, Italy : book of abstracts - extract 2015 (2015) |
Computational Hemolysis Estimation Based on Viscoelastic Deformation of Red Blood Cells Published in: [23rd Annual Meeting of the International Society for Rotary Blood Pumps, ISRBP 2015, 27.09.2015-29.09.2015, Dubrovnik, Croatia] (2015) |
Stabilized Finite Element Method for Flows with Multiple Co-Rotating Reference Frames Published in: YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics 2015, Aachen, Germany, July 20-23, 2015 : proceedings / ECCOMAS ; GACM ; RWTH Aachen, Lehrstuhl für Computergestützte Analyse Technischer Systeme (2015) |
Computational analysis of rotating geometries: an enhanced shear-slip mesh update method Published in: YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics 2015, Aachen, Germany, July 20-23, 2015 : proceedings / ECCOMAS ; GACM ; RWTH Aachen, Lehrstuhl für Computergestützte Analyse Technischer Systeme (2015) |
Simulation of rising bubbles in viscoelastic fluids Published in: [3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics, YIC GACM 2015, 20.07.2015-23.07.2015, Aachen, Germany] (2015) |
Efficient Jacobian calculation in a finite element software using automatic differentiation Published in: Conference Proceedings of the YIC GACM 2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon (2015) |
Using Automatic Differentiation to Create Sparse Jacobians for the Solution of Nonlinear Partial Differential Equations Published in: Book of abstracts 2015 / 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics March 23-27, 2015 Lecce, Italy (2015) |
Simulating Free-Surface Flows with Moving Boundaries : Combination of an Interface-Tracking and an Interface-Capturing Approach Published in: Book of abstracts 2015 / 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics March 23-27, 2015 Lecce, Italy (2015) |
Development of an Objective Function for Die-Swell in Extrusion Die Design Published in: Engineering optimization IV : proceedings of the International Conference on Engineering Optimization (ENGOPT 2014), Lisbon, Portugal, 8-11 September 2014 / editors, H.C. Rodrigues, (LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal), J. Herskovits (COPPE, Federal University of Rio de Janeiro, Rio de Janeiro, Brazil), C.M. Mota Soares, J.M. Guedes, A.L. Araújo & J.O. Folgado (LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal), F. Moleiro & J.F.A. Madeira (LAETA, IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal and ISEL, Instituto Superior de Engenharia de Lisboa, Lisbon, Portugal) (2015) |
A new log-conformation formulation Published in: 10th Annual European Rheology Conference : April 14-17, 2015 - Nantes, France (2015) |
Advanced Approaches for Shape Optimization : an Optimal Strategy for Shape Optimization of Extrusion Dies Published in: Proceedings of the jointly organised 11th World Congress on Computational Mechanics (WCCM XI) : 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; Barcelona, Spain, July 20 - 25, 2014 / Eugenio Oñate ... (eds.). Organized by Spanish Association for Numerical Methods in Engineering (SEMNI) with the support of International Center for Numerical Methods in Engineering (CIMNE) / Sociedad Española de Métodos Numéricos en Ingeniería. Eugenio Oñate (2014) |
Comparing Optimization Algorithms for Shape Optimization of Extrusion Dies Published in: Proceedings in applied mathematics and mechanics (2014) |
The Nurbs-Enhanced Finite Element Method (NEFEM) for Free-Surface Flow Simulations Published in: 11th World Congress on Computational Mechanics (WCCM XI) : 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; 20 - 25 July 2014, Barcelona, Spain (2014) |
A Fully Implicit Log-Conformation Formulation Published in: 11th World Congress on Computational Mechanics (WCCM XI) : 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; 20 - 25 July 2014, Barcelona, Spain (2014) |
Stress-Based and Strain-Based Hemolysis Estimation for Medical Devices Published in: 11th World Congress on Computational Mechanics (WCCM XI), 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI) : wccm-eccm-ecfd2014 ; July 20-25, 2014, Barcelona, Spain (2014) |
Fluid-Structure Interaction in the Context of a Scramjet Intake Published in: 44th AIAA Fluid Dynamics Conference (2014) |
Numerical Shape Optimization of Profile Extrusion Dies Published in: [AC.CES 2011 : Aachen Conference on Computational Engineering Science ; July 13-15, 2011, RWTH Aachen, Germany / Aachen Institute for Advanced Study in Computational Engineering Science, RWTH Aachen] (2013) |
The NURBS-Enhanced finite element method (NEFEM) for free-surface flow simulations Published in: 5th GACM Colloquium on Computational Mechanics : Sept. 30th - Oct 2nd 2013 (2013) |
Incorporating mesh properties in the Galerkin : Least-Squares stabilization parameters for flows of viscous and viscoelastic fluids Published in: 8th Annual European Rheology Conference : April 2-5, 2013 - Leuven, Belgium (2013) |
Unsteady blood damage estimation for medical devices Published in: V International Symposium on Modelling of Physiological Flows : MPF 2013 ; June 11-14, 2013, Chia Laguna, Domus de Maria, Cagliari, Sardinia, ITALY ; abstracts of invited lectures / Conference organized by CMCS - Ecole Polythecnique Fédérale de Lausanne ... (2013) |
Numerical Prediction and Post-Test Numerical Analysis of the ASDMAD Wind Tunnel Tests in ETW Published in: International Forum on Aeroelasticity & Structural Dynamics 2013 : Bristol, GB, June 24-26, 2013 (2013) |
Design Criteria in Numerical Design of Profile Extrusion Dies Published in: Key engineering materials (2013) |
Extension of an Aeroelastic Coupling Environment to Aircraft Configurations with Rigid-Body Degrees of Freedom Published in: New results in numerical and experimental fluid mechanics VIII : contributions to the 17th STAB/DGLR Symposium Berlin, Germany 2010 / Andreas Dillmann ... (eds.) (2013) |
Effects of Sidewall Compression and Relaminarization in a Scramjet Inlet Published in: Journal of propulsion and power (2013) |
Towards aerothermoelastic simulations of supersonic flow through nozzles Published in: Progress in Propulsion Physics. - Vol. 4 (2013) |
Werkzeugauslegung am Computer : Numerische Formoptimierung in der Profilextrusion Published in: [Deutsche Kautschuk-Tagung, DKT 2012, 02.07.2012-05.07.2012, Nürnberg, Germany] (2012) |
Design Optimization for Profile Extrusion Dies Published in: First ECCOMAS Young Investigators Conference : 24-27 April 2012, Aveiro, Portugal / A. Andrade-Campos, N. Lopes, R.A.F. Valente, H. Varum (editors) l (2012) |
Numerical simulation of hypersonic air intake flow in scramjet propulsion using a mesh-adaptive approach Published in: 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference 2012 : Tours, France, 24 - 28 September 2012 (2012) |
On the Influence of Constitutive Models on Shape Optimization for Artificial Blood Pumps Published in: Constrained optimization and optimal control for partial differential equations / ed. by Günter Leugering ... (2012) |
Computational Design Study of a 3D Hypersonic Intake for Scramjet Demonstrator Testing Published in: High performance computing in science and engineering '10 : transactions of the High Performance Computing Center, Stuttgart (HLRS) 2010 ; [14th [i.e. 13th] Annual Results and Review Workshop on High Performance Computing in Science and Engineering, which was held on October 4 - 5, 2010 at the Stuttgart University ; workshop proceedings] / Wolfgang E. Nagel ..., ed. (2011) |
A numerical study of blood flow behavior in blood vessels with emphasis on thromboembolic complications Published in: The international journal of artificial organs (2011) |
Physiological modelling in computational design of blood-handling devices Published in: The international journal of artificial organs (2011) |
Numerical Investigations of the Effects of Sidewall Compression and Relaminarization in 3D Scramjet Inlet Published in: AIAA meeting papers on disc (2011) |
Details Of Turbulence Modeling In Numerical Simulations Of Scramjet Intake Published in: ICAS 2010 : 27th Congress of the International Council of the Aeronautical Sciences ; Nice, France, 19-24 September 2010. - Vol. 1-5 (2011) |
Numerical Analysis of Transition Effects in 3D Hypersonic Intake Flows Published in: High performance computing in science and engineering '09 : transactions of the High Performance Computing Center Stuttgart (HLRS) 2009 ; [Twelfth Results and Review Workshop on High Performance Computing in Science and Engineering, which has been held October 8 - 9, 2008 [i.e. 2009] at Stuttgart University] / Wolfgang E. Nagel ..., ed. (2010) |
Stationäre und instationäre Untersuchungen an einem elastischen Flügelmodell mit Winglet im kryogenen Windkanal im Rahmen des ASDMAD-Projektes Published in: Deutscher Luft- und Raumfahrtkongress 2010 : Hamburg, 31. August - 2. September 2010; Tagungsband / DGLR. 0178-6326, S./Art.: 161191. - T.[1]: Manuskripte (2010) |
Modeling and Numerical Analysis of Platelet Activation, Adhesion and Aggregation in Artificial Organs Published in: ASAIO journal (2010) |
Numerical Modeling of Flow-Related Thrombus Formation under Physiological and Non-Physiological Flow Conditions Published in: Acta physiologica / Supplement (2010) |
Numerical prediction of blood damage in biomedical devices Published in: Biomedica : the Life Science Summit ; Aachen, Germany, March, 17-18, 2010 ; proceedings (2010) |
Shape optimization in support of the design of heart assist devices Published in: EngOpt 2010 : 2nd International Conference on Engineering Optimization ; 6-9 September 2010, Lisboa, Portugal ; book of abstracts and CD-ROM proceedings / ed. by Hélder Rodrigues ... (2010) |
New computational method in tensor-based hemolysis analysis for artificial heart pump Published in: ASAIO journal (2010) |
The influence of high shear on thrombosis and hemolysis in artificial organs Published in: The international journal of artificial organs (2010) |
Finite Element Simulations of Colloidal Aggregates under Shear Flow Conditions Published in: Proceedings / CFD 2010, 5th European Conference on Computational Fluid Dynamics : Lisbon, Portugal, June 14th - 17th, 2010 / ECCOMAS, the European Community on Computational Methods in Applied Sciences. Ed.: J. C. F. Pereira ... (2010) |
Numerical Study of Shock-Wave Turbulent Boundary Layer Interactions at Compression Corners Published in: EFMC-8 : Euromech Fluid Mechanics Conference - 8 ; September 13-16, 2010, Bad Reichenhall ; abstracts / organ. jointly by the Institute of Aerodynamcics and the Institute for Computational Mechanics of the Techn. Univ. München. - Pt. 1 (2010) |
Shape Optimization for Fluids using T-Splines for Shape Representation Published in: Proceedings in Applied Mathematics and Mechanics (2010) |
Shape identification of geophysical objects with level set methods Published in: Proceedings book / Fifth conference on inverse problems, control and shape optimization = Cinquième Colloque sur les problèmes inverses, le contrôle et l'optimisation de formes ; PICOF'10 ; April 7-9, 2010, Cartagena, Spain / J.A. Murillo, F. Periago, Eds. (2010) |
aReconstruction of geophysical layers with shape optimization and level set methods Published in: 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) : Karlsruhe 2010 / Ed.: Christian Wieners (2010) |
Preinvestigation of a Redesigned HIRENASD Wing Model in Preparation for New Aero-Structural Dynamic Experiments in ETW Published in: High performance computing in science and engineering '09 : transactions of the High Performance Computing Center Stuttgart (HLRS) 2009 ; [Twelfth Results and Review Workshop on High Performance Computing in Science and Engineering, which has been held October 8 - 9, 2008 [i.e. 2009] at Stuttgart University] / Wolfgang E. Nagel ..., ed. (2010) |
Multi-layer constrained identification in geophysics with shape optimization and level set methods Published in: Numerical analysis and applied mathematics : International Conference on Numerical Analysis and Applied Mathematics 2010, Rhodes, Greece, 19 - 25 September 2010 / sponsoring organizations: European Society of Computational Methods in Sciences and Engineering (ESCMSE)]. Ed. Theodore E. Simos .... - Vol. 1 (2009) |
Application of the Elastic Mesh Update and the Concentric Shell Motion Method to Finite-Element Propeller Simulation Published in: Program / 3rd GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : September 21 - 23, 2009, Leibniz Universität Hannover (2009) |
Validation of advanced turbulence models in QUADFLOW Published in: Turbulence, heat and mass transfer 6 : proceedings of the Sixth International Symposium on Turbulence, Heat and Mass Transfer Rome, Italy, 14 - 18 September, 2009 / [ICHMT]. Ed. by K. Hanjalić ... (2009) |
Influence of Sidewall Compression on Hypersonic Intake Performance Published in: AIAA meeting papers on disc (2009) |
Comparison of the Elastic Mesh Update and a Concentric Shell Motion Method Applied to the Refinement Study of the Voith-Schneider Propeller Published in: Computational methods in marine engineering 2009 : [extended abstracts presented at MARINE 2009, the Third International Conference on Computational Methods in Marine Engineering, held at the Norwegian University of Science and Technology (NTNU) in Tronheim, Norway, 15 - 17 June 2009] / ed. by Trond Kvamsdal (2009) |
Shape Optimization and Sensitivity Analysis with Applications in Complex Fluids Published in: Recent Advances in Optimization and its Applications in Engineering : The 14th Belgian-French-German Conference on Optimization / edited by Moritz Diehl, Francois Glineur, Elias Jarlebring, Wim Michiels (2009) |
Numerical Investigation of Compressible Turbulent Boundary Layer Over Expansion Corner Published in: AIAA meeting papers on disc (2009) |
Model-based Numerical Analysis of Platelet Adhesion, Thrombus Growth and Aggregation for Assist Devices Published in: The international journal of artificial organs (2009) |
Simplex Space-Time Meshes in Finite Element Simulations Published in: International journal for numerical methods in fluids (2008) |
Magnetic field simulations in support of interdiffusion quantification with NMR Published in: Chemical engineering science = Génie chimique (2008) |
An inverse-problem approach of NMR for interdiffusion measurements Published in: X-th International Workshop on Optimization and Inverse Problems in Electromagnetism, September 14 - 17, 2008, Ilmenau, Germany (2008) |
Modelling of transition effects in hypersonic intake flows using a correlation-based Iintermittency model Published in: AIAA meeting papers on disc (2008) |
Computational analysis of a 3D hypersonic intake for experimental testing at mach 8 Published in: AIAA meeting papers on disc (2008) |
Towards shape optimization for ventricular assist devices using parallel stabilized FEM Published in: NIC Symposium 2008 : symposium, 20 - 21 February 2008, Forschungszentrum Jülich ; proceedings / organized by John von Neumann Institute for Computing. Ed. by Gernot Münster; Dietrich Wolf; Manfred Kremer (ed.) (2008) |
Efficient Parallel Simulations in Support of Medical Device Design Published in: Parallel computing : architectures, algorithms and applications : [proceedings of the International Conference ParCo 2007] / John von Neumann Institute for Computing (NIC). Ed. by Christian Bischof ... (2007) |
Estimation of hemolysis in centrifugal blood pumps using morphology tensor approach Published in: Computational fluid and solid mechanics 2005 : proceedings, Third MIT Conference on Computational Fluid and Solid Mechanics, June 14 - 17, 2005 / ed.: K. J. Bathe. - 1. ed. (2005) |
GLS-type finite element methods for viscoelsatic fluid flow simulation Published in: Computational fluid and solid mechanics 2005 : proceedings, Third MIT Conference on Computational Fluid and Solid Mechanics, June 14 - 17, 2005 / ed.: K. J. Bathe. - 1. ed. (2005) |