Person

Florian Zwicke

M. Sc.

Wissenschaftlicher Mitarbeiter

Nicht verfügbar
Lehrstuhl für computergestützte Analyse technischer Systeme

Adresse

Gebäude: Rogowski

Raum: 224

Schinkelstr. 2

52062 Aachen

Kontakt

WorkPhone
Telefon: +49 241 80 99906
Fax Fax: +49 241 80 99910
 

Werdegang

  • 2013-2015, M.Sc. Computational Engineering Science, RWTH Aachen Universität
  • 2009-2013, B.Sc. Computational Engineering Science, RWTH Aachen Universität

Studienarbeiten

  • F. Zwicke, Application of an Automatic Differentiation Tool to the In-House Flow Solver , Masterarbeit, betreut durch P. Knechtges, Lehrstuhl für Computergestützte Analyse technischer Systeme, RWTH Aachen Universität, Februar 2015.
  • F. Zwicke, A posteriori error estimator for the incompressible Stokes equations , Seminararbeit, betreut durch P. Knechtges, Lehrstuhl für Computergestützte Analyse technischer Systeme, RWTH Aachen Universität, September 2014.
  H-Profil Urheberrecht: © Florian Zwicke

Forschung

  • Numerische Simulation von Kunststoffspritzguss (Erstarrung, Schwindung, Verzug)
  • Modellierung amorpher Polymere (Viskoelastizität, Nicht-lineare Elastizität)
  • Numerische Formoptimierung
  • Fluidsimulationen mit freien Oberfläche
  • Isogeometrische Analyse
  • Algorithmisches Differenzieren
 

Lehre

Isogeometrische Analyse (Übung) WS 15/16, WS 16/17

Abgeschlossene studentische Arbeiten

  • E. Salzmann, "Kombinierte IGA- und Standard-Gitter im Rahmen der Finite Elemente Methode", Masterarbeit, Lehrstuhl für Computergestützte Analyse technischer Systeme, RWTH Aachen Universität, Juni 2017.
  • M. Blatzheim, "Implementation of Isogeometric Analysis in a Flow Solver", Masterarbeit, Lehrstuhl für Computergestützte Analyse technischer Systeme, RWTH Aachen Universität, September 2015.
 

Fachzeitschriftenartikel

Titel
Inverse Design Based on Nonlinear Thermoelastic Material Models
Erschienen in: Proceedings in applied mathematics and mechanics : PAMM (2021)
Inverse design based on nonlinear thermoelastic material models applied to injection molding
Erschienen in: Finite elements in analysis and design (2019)
Numerical Design for Primary Shaping Manufacturing Processes
Erschienen in: Proceedings in applied mathematics and mechanics (2018)
Boundary-conforming free-surface flow computations: Interface tracking for linear, higher-order and isogeometric finite elements
Erschienen in: Computer methods in applied mechanics and engineering (2017)
Automatic implementation of material laws: Jacobian calculation in a finite element code with TAPENADE
Erschienen in: Computers and mathematics with applications : CAMWA (2016)
 

Beitrag zu einem Tagungsband

Titel
Inverse Design Method for Injection Molding Cavity Shapes
Erschienen in: Enhanced Material, Parts Optimization and Process Intensification : Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / Uwe Reisgen, Dietmar Drummer, Holger Marschall, Editor (2021)
Modern Design of a C++17 Continuum Mechanics Simulation Code : Algorithmic Differentiation and Flexible Coupling Strategies
Erschienen in: 14th WCCM & ECCOMAS Congress 2020 : virtual congress, 11-15 January, 2021 / IACM, ECCOMAS ; Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (eds.) (2021)
Analysis of Material Behaviors in Plastic Extrusion Processes
Erschienen in: 14th WCCM & ECCOMAS Congress 2020 : virtual congress, 11-15 January, 2021 / IACM, ECCOMAS ; Francisco Chinesta, Rémi Abgrall, Olivier Allix, David Néron, Michael Kaliske (eds.) (2021)
Inverse Design Based on Nonlinear Thermoelastic Material Models
Erschienen in: Proceedings in applied mathematics and mechanics : PAMM (2021)
Numerical Design for Primary Shaping Manufacturing Processes
Erschienen in: Proceedings in applied mathematics and mechanics (2018)
Phase Transitions in Injection Molding Simulations
Erschienen in: YIC 2017 : 4th ECCOMAS Young Investigators Conference and PhD Olympiad, 13 - 15 September 2017, Milano, Italy / Department of Civil and Environmental Engineering Politecnico di Milano (2017)
Coupling free-surface flow and mesh deformation in an isogeometric setting
Erschienen in: Coupled Problems in Science and Engineering VII - COUPLED PROBLEMS 2017 : proceedings of the VII International Conference on Coupled Problems in Science and Engineering, Rhodes Island, Greece, June 12-14, 2017 / edited by: Manolis Papadrakakis (Institute of Structural Analysis & Antiseismic Research, National Technical University of Athens, Greece), Eugenio Oñate (International Center for Numerical Methods in Engineering (CIMNE), Spain, Universitat Politècnica de Catalunya (UPC)), Bernhard A. Schrefler (Department of Civil, Environmental and Architectural Engineering, Università degli Studi di Padova, Italy) (2017)
Predicting shrinkage and warpage in injection molding: Towards automatized mold design
Erschienen in: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B (2017)
Free-Suface Flow Simulation with Space-Time Methods and Isogeometric Analysis
Erschienen in: USACM Thematic Conference on Isogeometric Analysis and Meshfree Methods : Abstracts : (Part 2, M-Z) (2016)
Efficient Jacobian calculation in a finite element software using automatic differentiation
Erschienen in: Conference Proceedings of the YIC GACM 2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon (2015)
Using Automatic Differentiation to Create Sparse Jacobians for the Solution of Nonlinear Partial Differential Equations
Erschienen in: Book of abstracts 2015 / 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics March 23-27, 2015 Lecce, Italy (2015)