[Poster]
High Definition Simulation of Packed Bed Chromatography
In: NIC-Symposium 2020, 2020

Rao, Jayghosh Subodh
Behr, Marek
von Lieres, Eric

[Dissertation / PhD Thesis]
Advanced methods for finite element simulation of rheology models for geophysical flows, 1 Online-Ressource (xxi, 134 Seiten) : Illustrationen, Diagramme, 2020

Gesenhues, Linda Gabriele

[Journal Article]
A multi-vector interface quasi-Newton method with linear complexity for partitioned fluid-structure interaction
In: Computer methods in applied mechanics and engineering, 361, 112810, 2020
[DOI: 10.1016/j.cma.2019.112810]

Spenke, Thomas
Hosters, Norbert Michael
Behr, Marek

[Contribution to a book, Contribution to a conference proceedings]
Space-Time NURBS-Enhanced Finite Elements for Solving the Compressible Navier-Stokes Equations
In: Numerical Methods for Flows : FEF 2017 Selected Contributions / Harald van Brummelen, Alessandro Corsini, Simona Perotto, Gianluigi Rozza, Editors, 97-107, 2020
[DOI: 10.1007/978-3-030-30705-9_9]

Make, Michael Karl Petronella
Hosters, Norbert Michael
Behr, Marek
Elgeti, Stefanie Nicole

[Journal Article]
Boundary-conforming finite element methods for twin-screw extruders using spline-based parameterization techniques
In: Computer methods in applied mechanics and engineering, 361, 112740, 2019
[DOI: 10.1016/j.cma.2019.112740]

Hinz, Jochen
Helmig, Jan
Möller, Matthias
Elgeti, Stefanie Nicole

[Contribution to a conference proceedings]
High Definition Simulation of Packed Bed Liquid Chromatography
In: 15th International PhD Seminar on Chromatographic Separation Science (SoCSS 2019) Quedlinburg, 2019

Rao, Jayghosh Subodh
Puettmann, Andreas
Behr, Marek
von Lieres, Eric

[Conference Presentation]
From ab-initio Mesoscale Modelling of Red Blood Cells Towards Macroscale Simulations in Biomedical Devices
In: 72nd Annual Meeting of the American Physical Society Division of Fluid Dynamics 2019-11-23 - 2019-11-26, 2019

Guglietta, Fabio
Biferale, Luca
Falcucci, Giacomo
Sbragaglia, Mauro
Behr, Marek
et al.

[Conference Presentation]
From ab-initio Mesoscale Modelling of Red Blood Cells Towards Macroscale Simulations in Biomedical Devices
In: The 28th International Conference on Discrete Simulation of Fluid Dynamics in Bengaluru, India, 2019

Guglietta, Fabio
Biferale, Luca
Falcucci, Giacomo
Sbragaglia, Mauro
Behr, Marek
et al.

[Contribution to a book, Contribution to a conference proceedings]
A Boundary-Conforming Eulerian Description for Structural Analysis
In: Book of abstracts of the 5th ECCOMAS Young Investigators Conference, 250-251, 2019

Salzmann, Eugen
Elgeti, Stefanie Nicole

[Conference Presentation]
CFD Simulation of Oil Jets for Piston Cooling Applications
In: Siemens Digital Industries Software 2019 Amsterdam, 2019

Wendling, Loic
Behr, Marek
Hopf, Anselm
Krämer, Frank
Weber, Carsten
et al.

[Conference Presentation]
Modeling and design of polymer melts in extrusion-like processes
In: II International Conference on Simulation for Additive Manufacturing Pavia 2019-09-11 - 2019-09-13, 2019

Hilger, Daniel
Zwicke, Florian
Elgeti, Stefanie Nicole

[Abstract, Contribution to a conference proceedings]
CFD Simulation of Oil Jets for Piston Cooling Applications
In: [5th ECCOMAS Young Investigators Conference, YIC 2019, 2019-09-01 - 2019-09-06, Kraków, Poland], 2019

Wendling, Loic
Karyofylli, Violeta
Hopf, Anselm
Behr, Marek

[Contribution to a book, Contribution to a conference proceedings]
Shape Optimization in Polymer Extrusion Using Shear-Thinning Fluids
In: Proceedings of 8th GACM Colloquium on Computational Mechanics, 469-472, 2019

Eusterholz, Sebastian Andreas
Elgeti, Stefanie Nicole

[Poster]
Combining NURBS-Enhanced Finite Elements and IsogeometricMethods in the Context of Fluid-Structure Interaction
In: Sixth International Workshop on High-Order Finite Element and Isogeometric Methods Pavia 2019-05-28 - 2019-05-31, 2019

Hosters, Norbert Michael
Patton, Alessia
Reali, Alessandro
Elgeti, Stefanie Nicole
Behr, Marek

[Journal Article]
Reduced-order model for robust aeroelastic control
In: CEAS Aeronautical Journal, 10 (2), 367-384, 2019
[DOI: 10.1007/s13272-018-0322-3]

Brüderlin, Manuel Pedro
Hosters, Norbert Michael
Behr, Marek

[Contribution to a conference proceedings]
Combining Interface Quasi-Newton Methods and the Robin-Neumann Scheme for Partitioned Fluid-Structure Interaction
In: Book of Abstracts : 5th ECCOMAS Young Investigators Conference, YIC 2019 : September 1-6, 2019, Kraków, Poland / Edited by: Konrad Perzyński, Krzysztof Bzowski, 332-333, 2019

Spenke, Thomas
Hosters, Norbert Michael
Behr, Marek

[Contribution to a book, Contribution to a conference proceedings]
A Novel Multi-Vector Interface Quasi-Newton Method for Partitioned Fluid-Structure Interaction
In: Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), 2019

Spenke, Thomas
Hosters, Norbert Michael
Behr, Marek

[Contribution to a book, Contribution to a conference proceedings]
Solving compressible Navier-Stokes equations on simplex space-time meshes
In: Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 485-486, 2019

von Danwitz, Max
Karyofylli, Violeta
Hosters, Norbert Michael
Behr, Marek

[Abstract, Contribution to a conference proceedings]
Simplex Space-Time Finite Element Methods for Advection-Diffusion Problems
In: Book of abstracts of the 5th ECCOMAS Young Investigators Conference, 283-284, 2019

von Danwitz, Max
Karyofylli, Violeta
Hosters, Norbert Michael
Behr, Marek

[Conference Presentation]
An Inverse Shape Design Method Considering Polymeric Solidification
In: VII International Conference on Isogeometric Analysis Munich 2019-09-18 - 2019-09-20, 2019

Key, Konstantin
Zwicke, Florian
Hughes, Thomas J. R.
Elgeti, Stefanie Nicole

[Conference Presentation]
Model Order Reduction for Time-Dependent Parametric ProblemsUsing a Space-Time FEM Solver
In: European Numerical Mathematics and Advanced Applications Conference 2019 Egmond aan Zee 2019-09-30 - 2019-10-04, 2019

Key, Fabian
Ballarin, Francesco
Elgeti, Stefanie Nicole
Rozza, Gianluigi

[Journal Article]
Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling
In: Computers & fluids, 192, 104261, 2019
[DOI: 10.1016/j.compfluid.2019.104261]

Karyofylli, Violeta
Wendling, Loic
Make, Michael Karl Petronella
Hosters, Norbert Michael
Behr, Marek

[Abstract, Contribution to a book, Contribution to a conference proceedings]
Unsteady, temperature-dependent, and non-Newtonian simulations in plastics processing
In: IWNMNNF 2019 : 19th International Workshop on Numerical Methods for Non-Newtonian Flows, June 16 - 20th, Peso da Régua, Portugal / Organizers: Alexandre Afonso, Universidade do Porto, Manuel Alves, Universidade do Porto, Jo~ao Miguel Nobrega, Universidade do Minho, Fernando Tavares Pinho, Universidade do Porto, 32-32, 2019

Elgeti, Stefanie Nicole
Helmig, Jan
Knechtges, Philipp

[Contribution to a book, Contribution to a conference proceedings]
A Sliding Interface Approach with Application to Twin-Screw Extruders
In: 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, August 28th - 30th, 2019, University of Kassel, Germany : Proceedings / Editors: Tobias Gleim and Stephan Lange, 331-334, 2019

Helmig, Jan
Elgeti, Stefanie Nicole

[Contribution to a conference proceedings]
Boundary-Conforming Finite Element Methods for Twin-Screw Extruders using Spline-Based Meshing Techniques : Non-Isothermal Flow Simulations for Complex Screw Elements
In: Book of Abstracts : 5th ECCOMAS Young Investigators Conference : YIC 2019 : September 1-6, 2019, Kraków, Poland / Edited by: Konrad Perzyński, Krzysztof Bzowski, 242-243, 2019

Helmig, Jan
Hinz, Jochen
Möller, Matthias
Elgeti, Stefanie Nicole

[Journal Article]
The variational multiscale formulation for the fully-implicit log-morphology equation as a tensor-based blood damage model
In: International journal for numerical methods in biomedical engineering, 35 (12), 1-19, 2019
[DOI: 10.1002/cnm.3262]

Haßler, Stefan Thomas
Pauli, Lutz Helmut
Behr, Marek

[Contribution to a conference proceedings]
Application of space-time refinement for droplet formation during GMA welding
In: Book of Abstracts : 5th ECCOMAS Young Investigators Conference : YIC 2019 : September 1-6, 2019, Kraków, Poland / Edited by: Konrad Perzyński, Krzysztof BzowskiBook of abstracts of the 5th ECCOMAS Young Investigators Conference : 1 - 6 September 2019, Kraków, Poland, 297-298, 2019

Karyofylli, Violeta
von Danwitz, Max
Wendling, Loic
Simon, Marek Sebastian
Mokrov, Oleg
et al.

[Contribution to a conference proceedings, Journal Article]
Axisymmetric two-phase flow simulations on space-time meshes
In: Proceedings in applied mathematics and mechanics : PAMM, 19 (1), e201900409, 2019
[DOI: 10.1002/pamm.201900409]

Karyofylli, Violeta
Kamaldinova, Liubov
Simon, Marek Sebastian
Mokrov, Oleg
Reisgen, Uwe Kaspar
et al.

[Journal Article]
Optimizing Micro-Tiles in Micro-Structures as a Design Paradigm
In: Computer aided design : CAD, 115, 23-33, 2019
[DOI: 10.1016/j.cad.2019.05.020]

Antolin, Pablo
Buffa, Annalisa
Cohen, Elaine
Dannenhoffer, John F.
Elber, Gershon
et al.

[Journal Article]
Inverse design based on nonlinear thermoelastic material models applied to injection molding
In: Finite elements in analysis and design, 165, 65-76, 2019
[DOI: 10.1016/j.finel.2019.07.002]

Zwicke, Florian
Elgeti, Stefanie Nicole

[Abstract, Contribution to a conference proceedings]
The Concept of a Virtual Ring for Mesh Update Methods in Moving Boundary Problems
In: Book of Abstracts : 5th ECCOMAS Young Investigators Conference : YIC 2019 : September 1-6, 2019, Kraków, Poland / Edited by: Konrad Perzyński, Krzysztof Bzowski, 248-249, 2019

Key, Fabian
Hilger, Daniel
Elgeti, Stefanie Nicole

[Journal Article]
Simplex space‐time meshes in compressible flow simulations
In: International journal for numerical methods in fluids, 91 (1), 29-48, 2019
[DOI: 10.1002/fld.4743]

von Danwitz, Max
Karyofylli, Violeta
Hosters, Norbert Michael
Behr, Marek

[Dissertation / PhD Thesis]
Efficient isogeometric finite element formulations for coupled systems on deforming surfaces, 1 Online-Ressource (v, 106, xxx Seiten) : Illustrationen, Diagramme, 2019

Zimmermann, Christopher

[Preprint]
Space-Time NURBS-Enhanced Finite Elementsfor Solving the Compressible Navier-Stokes Equations, 10 Seiten, 2019

Make, Michael Karl Petronella
Hosters, Norbert Michael
Behr, Marek
Elgeti, Stefanie Nicole

[Contribution to a conference proceedings, Journal Article]
CFD Simulation of Oil Jets for Piston Cooling Applications Comparing the Level Set and the Volume of Fluid Method
In: SAE international journal of advances and current practies in mobility, 1 (2), 2019-01-0155, 2019
[DOI: 10.4271/2019-01-0155]

Wendling, Loic
Behr, Marek
Hopf, Anselm
Kraemer, Frank
Weber, Carsten
et al.

[Dissertation / PhD Thesis]
A procedure for reduced-order model based robust aeroelastic control, 1 Online-Ressource (xxii, 125 Seiten) : Illustrationen, 2019

Brüderlin, Manuel Pedro

[Journal Article]
Mechanistic Understanding of Cu-CHA Catalyst as Sensor for Direct NH3-SCR Monitoring : The Role of Cu Mobility
In: ACS applied materials & interfaces, 11 (8), 8097-8105, 2019
[DOI: 10.1021/acsami.8b22104]

Chen, Peirong
Rizzotto, Valentina
Khetan, Abhishek
Xie, Kunpeng
Moos, Ralf
et al.

[Dissertation / PhD Thesis]
Close-contact melting - process insights and relevance for ice exploration, 1 Online-Ressource (101 Seiten) : Illustrationen, Diagramme, 2019

Schüller, Kai

[Journal Article]
Boundary-Conforming Finite Element Methods for Twin-Screw Extruders : Unsteady - Temperature-Dependent - Non-Newtonian Simulations
In: Computers & fluids, 190, 322-336, 2018
[DOI: 10.1016/j.compfluid.2019.06.028]

Helmig, Jan
Behr, Marek
Elgeti, Stefanie Nicole

[Preprint]
Boundary-Conforming Finite Element Methods for Twin-Screw Extruders : Unsteady - Temperature-Dependent - Non-Newtonian Simulations, 23 Seiten, 2018

Helmig, Jan
Behr, Marek
Elgeti, Stefanie Nicole

[Contribution to a conference proceedings, Journal Article]
Numerical Design for Primary Shaping Manufacturing Processes
In: Proceedings in applied mathematics and mechanics, 18 (1), e201800218, 2018
[DOI: 10.1002/pamm.201800218]

Zwicke, Florian
Schneppe, Tobias
Hopmann, Christian
Elgeti, Stefanie Nicole

[Conference Presentation]
Towards Simulation-Aided Design of Single-Screw Extruders
In: 6th International Conference on Engineering Optimization Lisbon 2018-09-17 - 2018-09-19, 2018

Eusterholz, Sebastian Andreas
Elgeti, Stefanie Nicole

[Master Thesis]
Macroscale Modeling of Solidification of Semi-Crystalline Polymers and Implementation of Suitable Methods, 2018

Key, Konstantin

[Abstract, Contribution to a conference proceedings]
Internal Compressible Flow Simulations on Simplex Space-Time Meshes
In: 89thAnnual Meeting of the International Association of Applied Mathematics and MechanicsMarch 19-23, 2018Munich, Germany, Book of Abstracts, 275-275, 2018

von Danwitz, Max
Karyofylli, Violeta
Hosters, Norbert Michael
Behr, Marek

[Abstract, Contribution to a conference proceedings, Journal Article]
Hemolysis Prediction in Medical Devices Using Cell Deformation and Pore Formation Models
In: Biomedical engineering, 63 (s1), S256-256, 2018

Haßler, Stefan Thomas
Pauli, Lutz Helmut
Behr, Marek

[Abstract, Contribution to a conference proceedings]
Multiple Reference Frames Formulation for Blood Damage Modeling in Medical Devices
In: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics : March 19-23, 2018 : Munich, Germany : Book of abstracts, 2018

Haßler, Stefan Thomas
Pauli, Lutz Helmut
Behr, Marek

[Dissertation / PhD Thesis]
Simulation of viscoelastic free-surface flows, 1 Online-Ressource (xiii,123 Seiten) : Illustrationen, Diagramme, 2018

Knechtges, Philipp

[Book, Proceedings]
Recent Advances in Computational Engineering : Proceedings of the 4th International Conference on Computational Engineering (ICCE 2017) in Darmstadt
In: 4th International Conference on Computational Engineering Darmstadt 2017-09-28 - 2017-09-29, x, 199 Seiten : Illustrationen, Diagramme, 2018
[DOI: 10.1007/978-3-319-93891-2]

Schäfer, Michael
Behr, Marek
Mehl, Miriam
Wohlmuth, Barbara

[Abstract]
Inverse and Iterative Approaches in Numerical Injection Mold Design
In: 6th International Conference on Engineering Optimization Lisbon 2018-09-17 - 2018-09-19, 1123, 1 Seite, 2018

Zwicke, Florian
Elgeti, Stefanie Nicole

[Dissertation / PhD Thesis]
Quantification of viscoelastic die swell as a design objective in the numerical design of profile extrusion dies, i, 157 Seiten : Illustrationen, 2018

Siegbert, Roland